AHUJA AMPLIFIER TZA-1200

DESCRIPTION: BTZ-7000 700 WATTS 2 ZONE PA POWER AMPLIFIER Stereo Music Operation for DJ programmes. Facilitates connection and operation of two separate groups of speakers simultaneously on ‘Mono’ mode. Ideal for places of worship. Box Speaker/Driver Unit selector switch for each zone. Bass boost defeated at Driver Unit position for safer operation of driver units. Resettable circuit breaker for protection against overload and short circuit. Zone On/Off facility. Output levels of each Zone can be set independently to desired levels and the zones can be switched On/Off without disturbing the volume settings.

DESCRIPION: SPA-10000 1000 WATTS High Wattage PA Power Amplifier Line Input 200mV/1V switchable for connecting a mixer or another amplifier. 100V input for connecting another amplifier output. Resettable circuit breaker for protection against overload and short circuit. Instant transfer to DC power (Car Battery) if AC power fails. Box Speaker/Driver Unit selector switch. Bass boost defeated at Driver Unit position for safer operation of driver units. Ideal for large installations where a high power output is required. A combination of a SSA-10000 and one SPA-10000 can deliver 2000W power output. Power Output 1350W Max., 1000W RMS at 10% THD, 850W RMS at 5% THD, 800W RMS at 2% THD Output Regulation ≤ 2 dB, no load to full load at 1kHz Input Channels 1 × Line 200mV/100kΩ, 1 × Line 1V/50kΩ, 1 × 100V Input Frequency Response 50-15,000Hz ±3dB Signal to Noise Ratio 60dB Tone Controls Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz Speaker Outputs 2Ω, 4Ω, 70V & 100V Power Supply AC: 220-240V 50/60Hz DC: 48V (4×12V Car Battery) Power Consumption AC: 1600VA DC: 12A Dimensions W540 × H185 × D510 mm Weight 41.0kg

Description: SPA-15000 1500 WATTS High Wattage PA Power Amplifier Super high power single channel PA booster amplifier, specially designed fro big installations where large number of speakers are required. Line Input 200mV/1V switchable for connecting a mixer or another amplifier. 100V input for connecting another amplifier output. Resettable circuit breaker for protection against overload and short circuit. Box Speaker/Driver Unit selector switch. Bass boost defeated at Driver Unit position for safer operation of driver units. 100V/70V, 4Ω and 2Ω power outputs Ideal for large installations where very high power output is required. Power Output 2000W Max., 1500W RMS at 10% THD, 1400W RMS at 5% THD, 1250W RMS at 2% THD Output Regulation ≤ 2 dB, no load to full load at 1kHz Input Channels 1 × Line 200mV/100kΩ, 1 × Line 1V/50kΩ, 1 × 100V Input Frequency Response 50-15,000Hz ±3dB Signal to Noise Ratio 60dB Tone Controls Bass: ±8dB at 100Hz, Treble: ±8dB at 10kHz Speaker Outputs 2Ω, 4Ω, 70V & 100V Power Supply AC: 220-240V 50/60Hz Power Consumption AC: 2400VA Dimensions W485 × H170 × D580 mm Weight 46.0kg

Description: TZA-1500® 160 WATTS 2 ZONE PA MIXER AMPLIFIER 6 Mic & 2 Aux Inputs. Preamplifier output for connecting to a Booster Amplifier and for recording the programme. Bass & Treble Controls. TZA-1500 permits connecting 100V (LMT) type speakers to one Zone and low impedance type speakers to other Zone without causing overloading and over heating. Instant transfer to DC power (Car Battery) if AC power fails. Zone On/Off facility. Output levels of each Zone can be set independently to desired levels and the zones can be switched On/Off without disturbing the volume settings. Power Output 100W + 100W Max., 80W + 80W RMS at 10% THD, 70W + 70W RMS at 5% THD, 60W + 60W RMS at 2% THD Output Regulation ≤ 2 dB, no load to full load at 1kHz Input Channels 6 × Mic 0.6mV/4.7kΩ, 2 × Aux 100mV/470 kΩ Frequency Response 65-15,000Hz ±3dB Signal to Noise Ratio 60dB Tone Controls Bass: -10dB at 100Hz, Treble: -10dB at 10kHz Outputs Preamp 200mV/600Ω Speaker Outputs 4Ω, 8Ω, 70V & 100V for each zone Power Supply AC: 220-240V 50/60Hz DC: 12V (12V Car Battery) Power Consumption AC: 300VA DC: 6A Dimensions W460 × H155 × D310 mm Weight 14.2kg

Description: APA-240 325 WATTS Installation PA Power Amplifier High quality booster amplifier in standard 19” rack mountable chassis, suitable for both table-top use and rack mounting. Ideal for fixed installations and a wide variety of PA applications such as in departmental stores, schools, hospitals etc. 1x Line 200mV unbalanced input and 2xLine 1V balanced inputs through XLR connector, one 1V input having priority over all other inputs. 100V input is provided for connecting another amplifier’s output in long line applications. Ground lift switch provided at rear panel which helps reducing the hum that occures due to multiple ground loops in the installations. Resettable circuit breaker for protection against overload and short circuit. Loop through output for connecting another booster amplifier. 19” Rack mountable chassis. Power Output 415W Max., 325W RMS at 10% THD, 300W RMS at 5% THD, 275W RMS at 2% THD Output Regulation ≤ 2 dB, no load to full load at 1kHz Input Channels 1 × 200mV/470kΩ (unbal.), 2 × 1V/50kΩ (bal.), 1 × 100V Input Frequency Response 50-15,000Hz ±3dB Signal to Noise Ratio 60dB Tone Controls Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz Outputs Loop through 1 × 200mV/600W, 2 ×1V/1kW Speaker Outputs 4Ω, 8Ω, 70V & 100V Power Supply AC: 220-240V 50/60Hz DC: 24V (2×12V Car Battery) Power Consumption AC: 600VA DC: 7A Dimensions W485 × H142 × D405 mm Weight 20.6kg

Description: BTZ-10000 1000 WATTS 2 ZONE PA POWER AMPLIFIER Ahuja model BTZ-10000 is rugged, reliable, cost-effective 1000 watts Two Zone Amplifier. BTZ-10000 is ideal for multi-speaker installations where a user needs to separately set power levels for two separate areas such as indoors & outdoors. Stereo Music input for DJ programmes. Facilitates connection and operation of two groups of speakers simultaneously on ‘Mono’ mode. Ideal for Places of Worship. Line Input & Output on each zone for connecting to a Mixer and Booster Amplifier respectively. Box Speaker/Driver Unit selector switch for each zone. Bass boost defeated at Driver Unit position for safer operation of driver units. Resettable circuit breaker for protection against overload and short circuit. Zone On/Off facility. Output levels of each Zone can be set independently to desired levels and the zones can be switched On/Off without disturbing the volume settings. Instant transfer to DC power (Car Battery) if AC power fails. Bar Graph Signal Display. SPECIFICATION: Power Output 750W + 750W Max., 500W + 500W RMS at 10% THD 450W + 450W RMS at 5% THD, 415W + 415W RMS at 2% THD Output Regulation ≤ 2 dB, no load to full load at 1kHz Input Channels Mono 2 × 200mV/100kΩ, Stereo L/R 200mV/100kΩ, Line L/R 1V/50kΩ Frequency Response 50-15,000Hz ±3dB Signal to Noise Ratio 60dB Tone Controls Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz Outputs Line 1V/1kΩ Speaker Outputs 4Ω, 8Ω, 70V & 100V for each zone Power Supply AC: 220-240V 50/60 Hz DC: 36V (3×12V Car Battery) Power Consumption AC: 1600VA DC: 16A Dimensions W510 × H220 × D440 mm Weight 40.0kg