Products tagged with 'amplifier br-250m'

View as Grid List
Sort by
Display per page

AHUJA AMPLIFIER PA-400S

Description: PA-400S 40 WATTS Mobile PA Mixer Amplifier 2 Mic & 1 Aux Input. 12V Car Battery Operation. Two Tone Siren (Wailing & Yelping) with volume control. Recommended for use with Mic MM-60M & Horn speakers SUH-25/SUH-40. Amplifier mounting bracket supplied. Ideal for Police Vehicles, Crowd Control, Ambulances, Publicity Vans, Electioneering etc. Power Output 50W Max., 40W RMS at 10% THD Input Channels 2 × Mic 1mV/4.7kΩ, 1 × Aux 100mV/330kΩ Frequency Response 100-10,000Hz ±3dB Signal to Noise Ratio 60dB Speaker Outputs 4Ω, 100V Line Power Supply 12V DC (Car Battery) Dimensions W180 × H80 × D240 mm Weight 2.1kg
6,100.00 (Rs) 5,795.00 (Rs)

Save Rs. 305.00

AHUJA AMPLIFIER BR-250M

Description: BR-250M 250 WATTS High Wattage PA Power Amplifier Line Input 200mV/1V switchable for connecting a mixer or another amplifier. Resettable circuit breaker for protection against overload and short circuit. Instant transfer to DC power (Car Battery) if AC power fails. Box Speaker/Driver Unit selector switch. Bass boost defeated at Driver Unit position for safer operation of driver units. By connecting four booster amplifiers BR-250M to one SSA-250M, the user can have a 1250W mono system.
25,000.00 (Rs) 23,750.00 (Rs)

Save Rs. 1250.00

AHUJA AMPLIFIER APA-240

Description: APA-240 325 WATTS Installation PA Power Amplifier High quality booster amplifier in standard 19” rack mountable chassis, suitable for both table-top use and rack mounting. Ideal for fixed installations and a wide variety of PA applications such as in departmental stores, schools, hospitals etc. 1x Line 200mV unbalanced input and 2xLine 1V balanced inputs through XLR connector, one 1V input having priority over all other inputs. 100V input is provided for connecting another amplifier’s output in long line applications. Ground lift switch provided at rear panel which helps reducing the hum that occures due to multiple ground loops in the installations. Resettable circuit breaker for protection against overload and short circuit. Loop through output for connecting another booster amplifier. 19” Rack mountable chassis. Power Output 415W Max., 325W RMS at 10% THD, 300W RMS at 5% THD, 275W RMS at 2% THD Output Regulation ≤ 2 dB, no load to full load at 1kHz Input Channels 1 × 200mV/470kΩ (unbal.), 2 × 1V/50kΩ (bal.), 1 × 100V Input Frequency Response 50-15,000Hz ±3dB Signal to Noise Ratio 60dB Tone Controls Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz Outputs Loop through 1 × 200mV/600W, 2 ×1V/1kW Speaker Outputs 4Ω, 8Ω, 70V & 100V Power Supply AC: 220-240V 50/60Hz DC: 24V (2×12V Car Battery) Power Consumption AC: 600VA DC: 7A Dimensions W485 × H142 × D405 mm Weight 20.6kg
31,600.00 (Rs) 30,020.00 (Rs)

Save Rs. 1580.00

AHUJA CABINEST SPEAKER SQX-850

36,700.00 (Rs) 34,865.00 (Rs)

Save Rs. 1835.00

AHUJA AMPLIFIER BTZ-20000A

Super Power Two Zone PA Booster Amplifier. The system consists of two part BTZ-20000P and BTZ-20000A. Both parts are interconnected through a specially designed connecting cable. It can be used for stereo music reproduction as well as mono. Magnetic hydraulic circuit protector for more precise overload protection.
41,000.00 (Rs) 38,950.00 (Rs)

Save Rs. 2050.00

AHUJA AMPLIFIER APA-480

Description: APA-480 600 WATTS Installation PA Power Amplifier 1x Line 200mV unbalanced input and 2xLine 1V balanced inputs through XLR connector, one 1V input having priority over all other inputs. 100V input is provided for connecting another amplifier’s output in long line applications. Ground lift switch provided at rear panel which helps reducing the hum that occures due to multiple ground loops in the installations. Resettable circuit breaker for protection against overload and short circuit. Loop through output for connecting another booster amplifier. 19” Rack mountable chassis. Instant transfer to DC power (Car Battery) if AC power fails. Power Output 750W Max., 600W RMS at 10% THD, 550W RMS at 5% THD, 500W RMS at 2% THD, 480W RMS at 1% THD Output Regulation ≤ 2 dB, no load to full load at 1kHz Input Channels 1 × 200mV/470kΩ (unbal.), 2 × 1V/50kΩ (bal.), 1 × 100V Input/50kΩ Frequency Response 50-15,000Hz ±3dB Signal to Noise Ratio 60dB Tone Controls Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz Outputs Loop through 1 × 200mV/600W, 2 ×1V/1kW Speaker Outputs 4Ω, 8Ω, 70V & 100V Power Supply AC: 220-240V 50/60Hz DC: 24V (2×12V Car Battery) Power Consumption AC: 1200VA DC: 15A Dimensions
53,000.00 (Rs) 50,350.00 (Rs)

Save Rs. 2650.00

AHUJA AMPLIFIER BTZ-7000

DESCRIPTION: BTZ-7000 700 WATTS 2 ZONE PA POWER AMPLIFIER Stereo Music Operation for DJ programmes. Facilitates connection and operation of two separate groups of speakers simultaneously on ‘Mono’ mode. Ideal for places of worship. Box Speaker/Driver Unit selector switch for each zone. Bass boost defeated at Driver Unit position for safer operation of driver units. Resettable circuit breaker for protection against overload and short circuit. Zone On/Off facility. Output levels of each Zone can be set independently to desired levels and the zones can be switched On/Off without disturbing the volume settings.
56,500.00 (Rs) 53,675.00 (Rs)

Save Rs. 2825.00

AHUJA AMPLIFIER LXA-2400

Description: LXA-2400 1200+1200 WATTS Dual Channel PA Power Amplifier Dual channel direct coupled amplifier. 2400 Watts rated output. Rugged and most reliable. A new benchmark for professionals requiring a sonically superior high power amplifier. Two selectable input sensitivities. Class H operation for optimum efficiency. Continuous Rated Power . Stereo/Mono 8Ω : 600W + 600W, 4Ω : 850W + 850W, 2Ω : 1200W + 1200W Bridged Output 8Ω : 1700W, 4Ω : 2400W THD + N < 1.0% Frequency Response (-1dB) 20-20,000Hz Power Bandwidth (0.5% THD) 20-20,000Hz Input Sensitivity 0dBu (775mV) & 4dBu (1.23V) (Selectable) Input Impedance 10k Unbalanced, 20k Balanced Signal to Noise Ratio > 95dB Channel Separation > 65dB at 1kHz Damping Factor 400 : 1 (8Ω) Slew Rate 35V/µs Protections Temperature, DC, RFI, Short Circuit, Overload, Built-in Limiter AC: Fuse 20Amp. (T 20A L); ± DC: Fuse 2 x 20Amp. (T 20A L) for each channel Fuse 2×3 Amp. (T 3A L) Input Connectors 2 × XLR, Stereo Phone Jack 6.3mm Output Connectors Speakon 4-Way and heavy duty of Binding Post for each channel Cooling Variable Speed DC Fan with Temperature Sensing Front Panel Controls 2 × 41 Step Level Attenuators Indicators Power ON, Signal, Clip, Temperature, Protect (Ch. A & B) Power Consumption (Rated) 2700VA @ 220-240V ~ 50/60Hz Dimensions W482 × H153 × D550mm Weight 28.70kg
59,500.00 (Rs) 56,525.00 (Rs)

Save Rs. 2975.00

AHUJA AMPLIFIER DXA-1802

Description: DXA-1802 900+900 WATTS Dual Channel PA Power Amplifier Dual channel direct coupled amplifier. 1800 Watts rated output. Rugged & reliable. Designed to work continuously under stringent operating conditions. High fidelity sound. Ideal for high-end music programmes. Continuous Rated Power . Stereo/Mono 8Ω 370W + 370W RMS, 4Ω 650W + 650W RMS, 2Ω 900W + 900W RMS Bridged Output 8Ω 1300W RMS, 4Ω 1800W RMS Single Channel Driven Output 8Ω 385W RMS, 4Ω 720W RMS, 2Ω 1100W RMS THD + N 0.5% Frequency Response (-1dB) 20-20,000Hz Power Bandwidth (0.5% THD) 20-20,000Hz Input Sensitivity 0dBm (775mV) Input Impedance 10k Unbalanced , 20k Balanced S/N Ratio 95dB Channel Separation 65dB at 1kHz Damping Factor 400 : 1 (8Ω) Slew Rate 35V/µs Protections Temperature, DC, RFI, Short Circuit, Overload, AC over voltage, Built-in limiter Input Connectors 2 × XLR, Stereo Phone Jack 6.3mm Output Connectors Speakon 4-Way, Heavy Duty Screw Terminals each channel Cooling Variable Speed DC Fan with Temperature Sensing Front Panel Controls 2× 21 Step Level Attenuators Indicators ON, Mode (Stereo, Mono, Bridge) Signal levels, Clip, Temperatures, Fault, Overload (Ch. A & B) Power Consumption 2700VA @ 240V / 50Hz Dimensions W482 × H165 × D500mm Weight 26.0kg
62,200.00 (Rs) 59,090.00 (Rs)

Save Rs. 3110.00

AHUJA AMPLIFIER LXA-3200

DESCRIPTION: LXA-3200 1600+1600 WATTS Dual Channel PA Power Amplifier Dual channel direct coupled amplifier. 3200 Watts rated output. Rugged, reliable and designed to work continuously under stringent conditions High fidelity sound. Ideal for high end music programmes. Two selectable input sensitivities. Class H operation for optimum efficiency. Continuous Rated Power . Stereo/Mono 8Ω : 700W + 700W, 4Ω: 1100W + 1100W 2Ω : 1600W + 1600W Bridged Output 8Ω : 2200W, 4Ω : 3200W THD + N < 1.0% Frequency Response (-3dB) 20-20,000Hz Power Bandwidth (0.5% THD) 20-20,000Hz Input Sensitivity 0dBu (775mV), 4dBu (1.23V) (Selectable) Input Impedance 10k Unbalanced, 20k Balanced Signal to Noise Ratio > 95dB Channel Separation > 65dB at 1kHz Damping Factor 400 : 1 (8Ω) Slew Rate 35V/µs Protections Temperature, DC, RFI, Short Circuit, Overload, Built-in Limiter AC: Fuse 25Amp. (T 25A L); ± DC: Fuse 2 x 25Amp. (T 25A L) for each channel, Fuse 2×3 Amp. (T 3A L) Input Connectors 2 × XLR, Stereo Phone Jack 6.3mm Output Connectors Speakon 4-Way and heavy duty Binding Post for each channel Cooling Variable Speed DC Fan with Temperature Sensing Front Panel Controls 2 × 41 Step Level Attenuators Indicators Power ON, Signal, Clip, Temperature, Protect (Ch. A & B) Power Consumption (Rated) 3900VA @ 220-240V ~ 50/60Hz Dimensions W482 × H153 × D550mm Weight
71,000.00 (Rs) 67,450.00 (Rs)

Save Rs. 3550.00

AHUJA AMPLIFIER BTZ-10000

Description: BTZ-10000 1000 WATTS 2 ZONE PA POWER AMPLIFIER Ahuja model BTZ-10000 is rugged, reliable, cost-effective 1000 watts Two Zone Amplifier. BTZ-10000 is ideal for multi-speaker installations where a user needs to separately set power levels for two separate areas such as indoors & outdoors. Stereo Music input for DJ programmes. Facilitates connection and operation of two groups of speakers simultaneously on ‘Mono’ mode. Ideal for Places of Worship. Line Input & Output on each zone for connecting to a Mixer and Booster Amplifier respectively. Box Speaker/Driver Unit selector switch for each zone. Bass boost defeated at Driver Unit position for safer operation of driver units. Resettable circuit breaker for protection against overload and short circuit. Zone On/Off facility. Output levels of each Zone can be set independently to desired levels and the zones can be switched On/Off without disturbing the volume settings. Instant transfer to DC power (Car Battery) if AC power fails. Bar Graph Signal Display. SPECIFICATION: Power Output 750W + 750W Max., 500W + 500W RMS at 10% THD 450W + 450W RMS at 5% THD, 415W + 415W RMS at 2% THD Output Regulation ≤ 2 dB, no load to full load at 1kHz Input Channels Mono 2 × 200mV/100kΩ, Stereo L/R 200mV/100kΩ, Line L/R 1V/50kΩ Frequency Response 50-15,000Hz ±3dB Signal to Noise Ratio 60dB Tone Controls Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz Outputs Line 1V/1kΩ Speaker Outputs 4Ω, 8Ω, 70V & 100V for each zone Power Supply AC: 220-240V 50/60 Hz DC: 36V (3×12V Car Battery) Power Consumption AC: 1600VA DC: 16A Dimensions W510 × H220 × D440 mm Weight 40.0kg
73,400.00 (Rs) 69,730.00 (Rs)

Save Rs. 3670.00

AHUJA LXA-4500 PA POWER AMPLIFIER

LXA-4500 2250+2250 WATTS AC Operation
86,700.00 (Rs) 82,365.00 (Rs)

Save Rs. 4335.00

AHUJA AMPLIFIER DXA-3502

Description: DXA-3502 1750+1750 WATTS Dual Channel PA Power Amplifier DXA-3502 is a rugged and most reliable dual channel amplifier. It sets a new benchmark for professionals requiring a sonically superior, high power amplifier. It has been designed to operate under stringent working conditions such as wide voltage fluctuations due to gensets/AC mains and high ambient temperatures. Adequate safeguards have been built-in to counter adverse working conditions. Ease of operation, combined with service accessibility has been optimized in the design. Class H operation for optimum efficiency. Continuous Rated Power . Stereo/Mono 8Ω 650W + 650W RMS, 4Ω 1200W + 1200W RMS, 2Ω 1750W + 1750W RMS Bridged Output 8Ω 2400W RMS, 4Ω 3500W RMS Single Channel Driven Output 8Ω 750W RMS, 4Ω 1350W RMS, 2Ω 1900W RMS THD + N 0.5% Frequency Response (-1dB) 20-20,000Hz Power Bandwidth (0.5% THD) 20-20,000Hz Input Sensitivity 0dBm (775mV) & 4dBm (1.23V) Input Impedance 10k Unbalanced, 20k Balanced S/N Ratio 95dB Channel Separation 65dB at 1kHz Damping Factor 400 : 1 (8Ω) Slew Rate 35V/µs Protections Temperature, DC, RFI, Short Circuit, Overload, AC over voltage, Built-in limiter Input Connectors 2×XLR, Stereo Phone Jack 6.3mm Output Connectors Speakon 4-Way, Heavy Duty Binding Post each channel Cooling Variable Speed DC Fan with Temperature Sensing Front Panel Controls 2× 41 Step Level Attenuators Indicators ON, Signal, Clip, Temperatures, Protect (Ch. A & B) Power Consumption 4200VA @ 240V / 50Hz Dimensions W482 × H153 × D615mm Weight 37.5kg
90,000.00 (Rs) 85,500.00 (Rs)

Save Rs. 4500.00

AHUJA AMPLIFIER LXA-6000

DESCRIPTION: LXA-6000 3000+3000 WATTS Dual Channel Power Amplifier Dual channel direct coupled amplifier. 6000 Watts rated output. Rugged and most reliable. A new benchmark for professionals requiring a sonically superior high power amplifier. 80Hz / 120Hz LPF. Built-in circuit for HF protection. Limiter ON/OFF. Two selectable input sensitivity. Class H operation for optimum efficiency. Continuous Rated Power . Stereo/Mono 8Ω : 1300W + 1300W, 4Ω : 2000W + 2000W, 2Ω : 3000W + 3000W Bridged Output 8Ω : 4000W, 4Ω : 6000W THD + N < 1.0% Frequency Response (-1dB) 20-20,000Hz Power Bandwidth (0.5% THD) 20-20,000Hz Input Sensitivity 0dBu (775mV), 4dBu (1.23V) Input Impedance 10k Unbalanced, 20k Balanced Signal to Noise Ratio > 95dB Channel Separation > 65dB at 1kHz Damping Factor 400 : 1 (8W ) Slew Rate 35V/µs Protections Temperature, DC, RFI, Short Circuit, Overload, Built-in Limiter (ON/OFF) AC: Circuit Protector 25A; ± DC: Fuse 2 x 30Amp. (T 30A L) for each zone Fuse 2×3 Amp. (T 3A L) Input Connectors 2 × XLR, Stereo Phone Jack 6.3mm Output Connectors Speakon 4-Way and heavy duty Binding Post for each channel Cooling Variable Speed DC Fan with Temperature Sensing Front Panel Controls 2 × 41 Step Level Attenuators Indicators Power ON, Signal, Clip, Temperature, Protect (Ch. A & B) Power Consumption (Rated) 7200VA @ 220-240V ~ 50/60Hz Dimensions W482 × H153 × D605mm Weight
100,000.00 (Rs) 95,000.00 (Rs)

Save Rs. 5000.00

AHUJA LXA-6000 PA POWER AMPLIFIER

Description: Model .LXA-6000 Stereo/Mono 8Ω : 1300W + 1300W, 4Ω : 2000W + 2000W, 2Ω : 3000W + 3000W Bridged Output 8Ω : 4000W, 4Ω : 6000W THD + N < 1.0% Frequency Response (-1dB) 20-20,000Hz Power Bandwidth (0.5% THD) 20-20,000Hz Input Sensitivity 0dBu (775mV), 4dBu (1.23V) Input Impedance 10k Unbalanced, 20k Balanced Signal to Noise Ratio > 95dB
101,000.00 (Rs) 95,950.00 (Rs)

Save Rs. 5050.00