Installation PA Power Amplifier
1x Line 200mV unbalanced input and 2xLine 1V balanced inputs through XLR connector, one 1V input having priority over all other inputs.
100V input is provided for connecting another amplifier’s output in long line applications.
Ground lift switch provided at rear panel which helps reducing the hum that occures due to multiple ground loops in the installations.
Resettable circuit breaker for protection against overload and short circuit.
Loop through output for connecting another booster amplifier.
19” Rack mountable chassis.
Instant transfer to DC power (Car Battery) if AC power fails.
750W Max., 600W RMS at 10% THD, 550W RMS at 5% THD, 500W RMS at 2% THD, 480W RMS at 1% THD
≤ 2 dB, no load to full load at 1kHz
1 × 200mV/470kΩ (unbal.), 2 × 1V/50kΩ (bal.), 1 × 100V Input/50kΩ
Signal to Noise Ratio
Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
Loop through 1 × 200mV/600W, 2 ×1V/1kW
4Ω, 8Ω, 70V & 100V
AC: 220-240V 50/60Hz DC: 24V (2×12V Car Battery)
AC: 1200VA DC: 15A