Description:
CSX-3081T
8W RMS
PA Ceiling Speaker
Attractive, ultra modern rimless design 8 watts ceiling speaker with excellent sound quality. The elegant, low profile design.
3” Full Range Speaker with power taps of 8/4/2W.
8 Watts continuous power handling capacity.
Easy mounting with spring mounting clamps.
100V operation with easy selection of power taps.
Ideal for Offices... Restaurants... Hotel... Hospitals... Shopping Malls... Gymnasiums...
INPUT POWER
8W RMS
POWER TAPS ON 100V
8/4/2W
IMPEDANCE
1.25k/2.5k/5kΩ
FREQUENCY RESPONSE
65-15,000Hz
SPL at 1kHz (1W/1m)
88dB
Dimensions
ø113 × H86 mm
WEIGHT
0.45kg
Description:
CSX-5081T
8W RMS
PA Ceiling Speaker
Elegant, low profile rimless ceiling speaker with clear, highly intelligible sound. Low profile appearance ideally suited for high-end offices, restaurants, bars, malls etc.
5” Full Range Speaker with power taps of 8/4/2W.
8 Watts continuous power handling capacity
Easy mounting with spring loaded wing clamps.
100V operation with easy selection of power taps through a terminal block.
Input Power
8W RMS
Power Taps ON 100V
8/4/2W
Impedance
1.25k/2.5k/5kΩ
Frequency Response
80-15,000Hz
SPL at 1kHz (1W/1m)
92dB
Dimensions
ø168 × H68 mm
Weight
0.68kg
DESCRIPTION:
Features:
GMB-6C is a sturdy, heavy duty base made of die-cast aluminium suitable for Ahuja electret condenser gooseneck microphones. It has a female XLR connector for directly mounting the gooseneck microphone and a male XLR socket at the rear for connecting standard microphone cable to the amplifier.
Heavy weight housing with anti-skid feet ensures stability.
10 mtrs. shielded 2-core mic cable with XLR connector & ¼†phone plug.
Built-in cell housing for 2×UM-3 pencil cells (3V) for operating the condenser microphone.
On/Off switch provided. Special electronic circuitry for minimal switch noise.
Description:
CSD-6303T
30W RMS
2-Way PA Ceiling Speakers
High power 2-way flush mount ceiling speaker for excellent reproduction of both speech and music. Wide frequency response and adjustable tweeter for optimum directivity.
Operates on 100V line with power taps of 30/15/7.5W.
Moulded plastic frame with metal mesh grill.
Tweeter can be tilted at an angle to focus clear, intelligible sound in the desired direction.
100V line operation with easy power tap selection through a terminal block.
Ideal for Hotels… Office Buildings… Restaurants… Hospitals… Shopping Malls… Department Stores… Cinemas… Gyms…
Input Power
30W RMS
Power Taps on 100V
30/15/7.5W
Impedance
330/670/1.33kΩ
Frequency Response
90-18,000Hz
SPL at 1kHz (1W/1m)
92dB
Speaker
Woofer 150mm (6”), Tweeter 25mm (1”)
Dimensions
ø230 × H120 mm
Weight
1.65kg
Description:
ASC-20T
15W/100V
PA Column Speaker
For Indoor & Outdoor applications such as in Halls, Auditoria, Airport Lounges.
Weather resistant — for use under roof eaves. Foam layer
to protect speakers from dust.
Array of speakers radiate forward sound beam for wider audience coverage.
Mounting clamps & hardware supplied.
Column speakers in grey colour for indoor & outdoor applications.
Aluminium extruded cabinet with die-cast aluminium covers. Aluminium mesh grille in black colour.
100V transformer with rotary switch for power tap selection.
Input Power
15W RMS, 23W Max.
Power Taps
15/10/5/2.5W
Voltage
100V
Frequency Response
150-10,000Hz
SPL at 1kHz
92dB/1W/1m
Speakers
2 × 6”×4”
Dimensions
W150× H465× D130 mm
Weight
3.50kg
DESCRIPTION:
Technical Details
Item Weight 1.42 Kg
Package Dimensions 32.4 x 30.2 x 9 cm
Batteries: 1 9V batteries required.
Item model number AWM-490V1
Colour Black
Battery Type Mercury Oxide
A compact superior quality speaker system comprising of a single 12” Full Range Dual Cone speaker and a Piezo Horn Tweeter. The system is outstanding for its ability to handle 100W continuous power with undistorted response and is ideal for small PA applications. The speakers are housed in a Rugged Closed box Enclosure made of 18mm board, and Carpet covered.
All Purpose 7 Channel PA Mixer Preamplifier
Each input channel has a 1/4 " balanced phone jack for Mic/Line & accepts both balanced & unbalanced signals.
Independent USB playback channel with BASS, TREBLE and LEVEL controls.
Built-in digital effects processor with Delay, Repeat & Level controls.
Description:
SSB-60®EM
60 WATTS
MEDIUM WATTAGE PA MIXER AMPLIFIER
4 Mic & 1 Aux Inputs.
Preamplifier Output for connecting to a Booster Amplifier and for recording the programme.
Instant transfer to DC power (Car Battery) if AC power fails.
Cut type Bass & Treble Controls.
Power Output
90W Max., 65W RMS at 10% THD, 60W RMS at 5% THD, 50W RMS at 2% THD
Output Regulation
≤ 2 dB, no load to full load at 1kHz
Input Channels
4 × Mic 0.65mV/4.7kΩ, 1 × Aux 100mV/470 kΩ
Frequency Response
50-15,000Hz ±3dB
Signal to Noise Ratio
60dB
Tone Controls
Bass: -10dB at 100Hz, Treble: -10dB at 10kHz,
Speaker Outputs
4Ω, 8Ω, 16Ω & 100V
Power Supply
AC: 220-240V 50/60Hz, DC: 12V (12V Car Battery)
Power Consumption
AC: 160VA DC: 3A
Dimensions
W350 × H120 × D265 mm
Description:
SSB-80®M
80 WATTS
MEDIUM WATTAGE PA MIXER AMPLIFIER
5 Mic & 2 Aux Inputs.
Preamplifier Output for connecting to a Booster Amplifier and for recording the programme.
Cut type Bass & Treble controls.
Instant transfer to DC power (Car Battery) if AC power failS.
Power Output
110W Max., 80W RMS at 10% THD, 75W RMS at 5% THD, 60W RMS at 2% THD
Output Regulation
≤ 2 dB, no load to full load at 1kHz
Input Channels
5 × Mic 0.65mV/4.7kΩ, 2 × Aux 100mV/470kΩ
Frequency Response
65-15,000Hz ±3dB
Signal to Noise Ratio
60dB
Tone Controls
Bass: -10dB at 100Hz, Treble: -10dB at 10kHz
Outputs
Preamp 200mV/600Ω
Speaker Outputs
4Ω, 8Ω, 16Ω, 70V & 100V
Power Supply
AC: 220-240V 50/60Hz DC: 12V (12V Car Battery)
Power Consumption
AC: 180VA DC: 3A
Dimensions
W355 × H133 × D285 mm
Weight
8.5kg
Description:
SSA-100®M
100 WATTS
MEDIUM WATTAGE PA MIXER AMPLIFIER
5 Mic & 2 Aux Inputs.
Preamplifier and Line Output for connecting to a Booster Amplifier and for recording the programme.
Instant transfer to DC power (Car Battery) if AC power fails.
Bass & Treble Tone Controls cut type.
Power Output
130W Max., 100W RMS at 10% THD, 90W RMS at 5% THD, 80W RMS at 2% THD
Output Regulation
≤ 2 dB, no load to full load at 1kHz
Input Channels
5 × Mic 0.65mV/4.7kΩ, 1 × Aux 50mV/470kΩ, 1 × Aux 150mV/470kΩ
Frequency Response
50-15,000Hz ±3dB
Signal to Noise Ratio
60dB
Tone Controls
Bass: -10dB at 100Hz, Treble: -10dB at 10kHz
Outputs
Preamp 200mV/600Ω, Line 1V/1kΩ
Speaker Outputs
4Ω, 8Ω, 16Ω, 70V & 100V
Power Supply
AC: 220-240V 50/60Hz DC: 24V (2×12V Car Battery)
Power Consumption
AC: 220VA DC: 3A
Dimensions
W420 × H135 × D290 mm
Weight
10.5kg
Description:
SSB-120®
120 WATTS
MEDIUM WATTAGE PA MIXER AMPLIFIER
5 Mic & 2 Aux Inputs.
Line Ouput for connecting to a Booster Amplifier and Preamplifier Output for recording the programme.
Cut type Bass & Treble controls.
Instant transfer to DC power (Car Battery) if AC power fails.
Power Output
160W Max., 120W RMS at 10% THD, 105W RMS at 5% THD, 95W RMS at 2% THD
Output Regulation
≤ 2 dB, no load to full load at 1kHz
Input Channels
5 × Mic 0.65mV/4.7kΩ, 2 × Aux 100mV/470 kΩ
Frequency Response
50-15,000Hz ±3dB
Signal to Noise Ratio
60dB
Tone Controls
Bass: -10dB at 100Hz, Treble: -10dB at 10kHz
Outputs
Preamp 200mV/600Ω, Line 1V/1kΩ
Speaker Outputs
4Ω, 8Ω, 16Ω, 70V & 100V
Power Supply
AC: 220-240V 50/60Hz DC: 12V (12V Car Battery)
Power Consumption
AC: 250VA DC: 5.5A
Dimensions
W420 × H135 × D295 mm
Weight
11.3kg
Description:
SSA-160®EM
160 WATTS
MEDIUM WATTAGE PA MIXER AMPLIFIER
5 Mic & 2 Aux Inputs.
Preamplifier and Line Output for connecting to a Booster Amplifier and for recording the programme.
Line Input for connecting the output from any external mixer or permitting SSA-160EM to be used as a Booster Power Amplifier.
Resettable circuit breaker for protection against overload and short circuit.
Instant transfer to DC power (Car Battery) if AC power fails.
Box Speaker/Driver Unit selector switch. Bass boost defeated at Driver Unit position for safer operation of driver units.
Power Output
220W Max., 160W RMS at 10% THD, 140W RMS at 5% THD, 120W RMS at 2% THD
Output Regulation
≤ 2 dB, no load to full load at 1kHz
Input Channels
5 × Mic 0.65mV/4.7kΩ, 2 × Aux 100mV/470kΩ, 1 × Line 1V/50kΩ
Frequency Response
50-15,000Hz ±3dB
Signal to Noise Ratio
60dB
Tone Controls
Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
Output
Preamp 200mV/600Ω, Line 1V/1kΩ
Speaker Output
4Ω, 8Ω, 70V & 100V
Power Supply
AC: 220-240V 50/60Hz DC: 24V (2×12V Car Battery)
Power Consumption
AC: 300VA DC: 4A
Dimensions
W420 × H155 × D320 mm
Weight
13.6kg
Description:
TZA-1500®
160 WATTS
2 ZONE PA MIXER AMPLIFIER
6 Mic & 2 Aux Inputs.
Preamplifier output for connecting to a Booster Amplifier and for recording the programme.
Bass & Treble Controls.
TZA-1500 permits connecting 100V (LMT) type speakers to one Zone and low impedance type speakers to other Zone without causing overloading and over heating.
Instant transfer to DC power (Car Battery) if AC
power fails.
Zone On/Off facility. Output levels of each Zone can be set independently to desired levels and the zones can be switched On/Off without disturbing the volume settings.
Power Output
100W + 100W Max., 80W + 80W RMS at 10% THD, 70W + 70W RMS at 5% THD, 60W + 60W RMS at 2% THD
Output Regulation
≤ 2 dB, no load to full load at 1kHz
Input Channels
6 × Mic 0.6mV/4.7kΩ, 2 × Aux 100mV/470 kΩ
Frequency Response
65-15,000Hz ±3dB
Signal to Noise Ratio
60dB
Tone Controls
Bass: -10dB at 100Hz, Treble: -10dB at 10kHz
Outputs
Preamp 200mV/600Ω
Speaker Outputs
4Ω, 8Ω, 70V & 100V for each zone
Power Supply
AC: 220-240V 50/60Hz DC: 12V (12V Car Battery)
Power Consumption
AC: 300VA DC: 6A
Dimensions
W460 × H155 × D310 mm
Weight
14.2kg
Description:
SSA-250®M
250 WATTS
High Wattage PA Mixer Amplifier
6 Mic & 2 Aux Inputs.
Preamplifier and Line Output for connecting to a Booster Amplifier and for recording the programme.
Line Input for connecting the output from any external mixer or permitting SSA-250 to be used as a Booster Power Amplifier.
Resettable circuit breaker for protection against overload and short circuit.
Instant transfer to DC power (Car Battery) if AC power fails.
Box Speaker/Driver Unit selector switch. Bass boost defeated at Driver Unit position for safer operation of driver units.
Power Output
300W Max., 250W RMS at 10% THD, 220W RMS at 5% THD, 200W RMS at 2% THD
Output Regulation
≤ 2 dB, no load to full load at 1kHz
Input Channels
6 × Mic 0.65mV/4.7kΩ, 2 × Aux 100mV/470 kΩ, 1 × Line 1V/50kΩ
Frequency Response
50-15,000Hz ±3dB
Signal to Noise Ratio
60dB
Tone Controls
Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
Outputs
Preamp 200mV/600Ω, Line 1V/1kΩ
Speaker Outputs
4Ω, 8Ω, 70V & 100V
Power Supply
AC: 220-240V 50/60Hz DC: 24V (2×12V Car Battery
Power Consumption
AC: 460VA DC: 6A
Dimensions
W450 × H160 × D340 mm
Weight
16.0kg
Description:
SSA-250®FX
250 WATTS
High Wattage PA Mixer Amplifier
6 Mic & 2 Aux Inputs.
Built-in digital effect processor for 2 Mic Inputs.
Preamplifier and Line Output for connecting to a Booster Amplifier and for recording the programme.
Line Input for connecting the output from any external mixer or permitting SSA-250®M to be used as a Booster Power Amplifier.
Resettable circuit breaker for protection against overload and short circuit. Instant transfer to DC power (Car Battery) if AC power fails.
Box Speaker/Driver Unit selector switch. Bass boost defeated at Driver Unit position for safer operation of driver units.
Power Output
300W Max., 250W RMS at 10% THD 220W RMS at 5% THD, 200W RMS at 2% THD
Output Regulation
≤ 2 dB, no load to full load at 1kHz
Input Channels
6×Mic 0.65mV/4.7kΩ, 2×Aux 100mV/470 kΩ, 1 × Line 1V/50kΩ
Delay System
Digital Signal Processing
Delay Range Setting
60-300ms
Frequency Response
50-15,000Hz ±3dB
Signal to Noise Ratio
60dB
Tone Controls
Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
Outputs
Preamp 200mV/600Ω, Line 1V/1kΩ
Speaker Outputs
4Ω, 8Ω, 70V & 100V
Power Supply
AC: 220-240V 50/60Hz DC: 24V (2×12V Car Battery)
Power Consumption
AC: 460VA DC: 6A
Dimensions
W450 × H160 × D340 mm
Weight
15.70kg
Description:
APA-240
325 WATTS
Installation PA Power Amplifier
High quality booster amplifier in standard 19” rack mountable chassis, suitable for both table-top use and rack mounting. Ideal for fixed installations and a wide variety of PA applications such as in departmental stores, schools, hospitals etc.
1x Line 200mV unbalanced input and 2xLine 1V balanced inputs through XLR connector, one 1V input having priority over all other inputs.
100V input is provided for connecting another amplifier’s output in long line applications.
Ground lift switch provided at rear panel which helps reducing the hum that occures due to multiple ground loops in the installations.
Resettable circuit breaker for protection against overload and short circuit.
Loop through output for connecting another booster amplifier.
19” Rack mountable chassis.
Power Output
415W Max., 325W RMS at 10% THD, 300W RMS at 5% THD, 275W RMS at 2% THD
Output Regulation
≤ 2 dB, no load to full load at 1kHz
Input Channels
1 × 200mV/470kΩ (unbal.), 2 × 1V/50kΩ (bal.), 1 × 100V Input
Frequency Response
50-15,000Hz ±3dB
Signal to Noise Ratio
60dB
Tone Controls
Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
Outputs
Loop through 1 × 200mV/600W, 2 ×1V/1kW
Speaker Outputs
4Ω, 8Ω, 70V & 100V
Power Supply
AC: 220-240V 50/60Hz DC: 24V (2×12V Car Battery)
Power Consumption
AC: 600VA DC: 7A
Dimensions
W485 × H142 × D405 mm
Weight
20.6kg
Description:
PAM-3001
325 WATTS
INSTALLATION PA MIXER AMPLIFIER
5 Mic, 3 Aux & 1 Telephone Inputs.
2 Balanced Mic Inputs through Combo (Female XLR socket cum ¼” Stereo Phone Jack) connectors.
Mic-1 and Telephone Input provided with Voice Operated Priority over all other programmes.
Preamplifier and Line Output for recording the programme and connecting to a booster amplifier.
Line Input for connecting an external audio mixer or permitting PAM-3001 to be used as a Booster Power Amplifier.
Resettable circuit breaker for protection against overload and short circuit.
Instant transfer to DC power (Car Battery) if AC power fails.
Power Output
415W Max., 325W RMS at 10% THD, 300W RMS at 5% THD, 275W RMS at 2% THD
Output Regulation
≤ 2 dB, no load to full load at 1kHz
Input Channels
3 × Mic 0.65mV/4.7kΩ, 2 × Mic 1.0mV/2kΩ, 1 × Line 1V/50kΩ, 2 × Aux 100mV/470kΩ, 1 × Aux 250mV/470kΩ, 1 × Telephone 150mV/10kΩ
Frequency Response
50-15,000Hz ±3dB
Signal to Noise Ratio
60dB
Tone Controls
Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
Outputs
Preamp 200mV/600Ω, Line 1V/1kΩ, Monitor 5V/8Ω
Speaker Outputs
4Ω, 8Ω, 70V & 100V
Power Supply
AC: 220-240V 50/60Hz DC: 24V (2×12V Car Battery)
Power Consumption
AC: 600VA DC: 7A
Dimensions
W482 × H133 × D390 mm
Weight
19.8kg
PA AUDIO MIXING CONSOLES - STEREO
14 Input Channels with separate 6.3mm balanced phone jack for Mic and Line & accepts both balanced & unbalanced signals.
Each channel has GAIN, BASS, MID, TREBLE, ECHO, PAN and slide LEVEL controls with CLIP LED indicator.
Description:
PAM-3001Z
325 WATTS
INSTALLATION PA MIXER AMPLIFIER
5 Mic, 3 Aux & 1 Telephone Inputs.
Features and specifications are similar to PAM-3001.
PAM-3001Z has the additional feature of distributing the total load of 100V line amongst 5 speaker zones, allowing the output to designated areas. The zones are selectable through a zone selector push-button switch on the front panel.
Ideal for use in commercial establishments where the building may be sectionised in different areas such as office, warehouse, workshop etc.
19” Rack mountable.
Power Output
415W Max., 325W RMS at 10% THD, 300W RMS at 5% THD, 275W RMS at 2% THD
Output Regulation
≤ 2 dB, no load to full load at 1kHz
Input Channels
3 × Mic 0.65mV/4.7kΩ, 2 × Mic 1.0mV/2kΩ, 1 × Line 1V/50kΩ, 2 × Aux 100mV/470kΩ, 1 × Aux 250mV/470kΩ, 1 × Telephone 150mV/10kΩ
Frequency Response
50-15,000Hz ±3dB
Signal to Noise Ratio
60dB
Tone Controls
Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
Outputs
Preamp 200mV/600Ω, Line 1V/1kΩ, Monitor 5V/8Ω
Speaker Outputs
4Ω, 8Ω, 70V & 100V
Zone Selection
5 + All Zone
Power Supply
AC: 220-240V 50/60Hz DC: 24V (2×12V Car Battery)
Power Consumption
AC: 600VA DC: 7A
Dimensions
W482 × H133 × D390 mm
Weight
19.8kg