DESCRIPTION:
Features:
GMB-6C is a sturdy, heavy duty base made of die-cast aluminium suitable for Ahuja electret condenser gooseneck microphones. It has a female XLR connector for directly mounting the gooseneck microphone and a male XLR socket at the rear for connecting standard microphone cable to the amplifier.
Heavy weight housing with anti-skid feet ensures stability.
10 mtrs. shielded 2-core mic cable with XLR connector & ¼†phone plug.
Built-in cell housing for 2×UM-3 pencil cells (3V) for operating the condenser microphone.
On/Off switch provided. Special electronic circuitry for minimal switch noise.
DESCRIPTION:
Technical Details
Item Weight 1.42 Kg
Package Dimensions 32.4 x 30.2 x 9 cm
Batteries: 1 9V batteries required.
Item model number AWM-490V1
Colour Black
Battery Type Mercury Oxide
A compact superior quality speaker system comprising of a single 12” Full Range Dual Cone speaker and a Piezo Horn Tweeter. The system is outstanding for its ability to handle 100W continuous power with undistorted response and is ideal for small PA applications. The speakers are housed in a Rugged Closed box Enclosure made of 18mm board, and Carpet covered.
All Purpose 7 Channel PA Mixer Preamplifier
Each input channel has a 1/4 " balanced phone jack for Mic/Line & accepts both balanced & unbalanced signals.
Independent USB playback channel with BASS, TREBLE and LEVEL controls.
Built-in digital effects processor with Delay, Repeat & Level controls.
Description:
SSB-60®EM
60 WATTS
MEDIUM WATTAGE PA MIXER AMPLIFIER
4 Mic & 1 Aux Inputs.
Preamplifier Output for connecting to a Booster Amplifier and for recording the programme.
Instant transfer to DC power (Car Battery) if AC power fails.
Cut type Bass & Treble Controls.
Power Output
90W Max., 65W RMS at 10% THD, 60W RMS at 5% THD, 50W RMS at 2% THD
Output Regulation
≤ 2 dB, no load to full load at 1kHz
Input Channels
4 × Mic 0.65mV/4.7kΩ, 1 × Aux 100mV/470 kΩ
Frequency Response
50-15,000Hz ±3dB
Signal to Noise Ratio
60dB
Tone Controls
Bass: -10dB at 100Hz, Treble: -10dB at 10kHz,
Speaker Outputs
4Ω, 8Ω, 16Ω & 100V
Power Supply
AC: 220-240V 50/60Hz, DC: 12V (12V Car Battery)
Power Consumption
AC: 160VA DC: 3A
Dimensions
W350 × H120 × D265 mm
Description:
SSB-80®M
80 WATTS
MEDIUM WATTAGE PA MIXER AMPLIFIER
5 Mic & 2 Aux Inputs.
Preamplifier Output for connecting to a Booster Amplifier and for recording the programme.
Cut type Bass & Treble controls.
Instant transfer to DC power (Car Battery) if AC power failS.
Power Output
110W Max., 80W RMS at 10% THD, 75W RMS at 5% THD, 60W RMS at 2% THD
Output Regulation
≤ 2 dB, no load to full load at 1kHz
Input Channels
5 × Mic 0.65mV/4.7kΩ, 2 × Aux 100mV/470kΩ
Frequency Response
65-15,000Hz ±3dB
Signal to Noise Ratio
60dB
Tone Controls
Bass: -10dB at 100Hz, Treble: -10dB at 10kHz
Outputs
Preamp 200mV/600Ω
Speaker Outputs
4Ω, 8Ω, 16Ω, 70V & 100V
Power Supply
AC: 220-240V 50/60Hz DC: 12V (12V Car Battery)
Power Consumption
AC: 180VA DC: 3A
Dimensions
W355 × H133 × D285 mm
Weight
8.5kg
Description:
SSA-100®M
100 WATTS
MEDIUM WATTAGE PA MIXER AMPLIFIER
5 Mic & 2 Aux Inputs.
Preamplifier and Line Output for connecting to a Booster Amplifier and for recording the programme.
Instant transfer to DC power (Car Battery) if AC power fails.
Bass & Treble Tone Controls cut type.
Power Output
130W Max., 100W RMS at 10% THD, 90W RMS at 5% THD, 80W RMS at 2% THD
Output Regulation
≤ 2 dB, no load to full load at 1kHz
Input Channels
5 × Mic 0.65mV/4.7kΩ, 1 × Aux 50mV/470kΩ, 1 × Aux 150mV/470kΩ
Frequency Response
50-15,000Hz ±3dB
Signal to Noise Ratio
60dB
Tone Controls
Bass: -10dB at 100Hz, Treble: -10dB at 10kHz
Outputs
Preamp 200mV/600Ω, Line 1V/1kΩ
Speaker Outputs
4Ω, 8Ω, 16Ω, 70V & 100V
Power Supply
AC: 220-240V 50/60Hz DC: 24V (2×12V Car Battery)
Power Consumption
AC: 220VA DC: 3A
Dimensions
W420 × H135 × D290 mm
Weight
10.5kg
Description:
SSB-120®
120 WATTS
MEDIUM WATTAGE PA MIXER AMPLIFIER
5 Mic & 2 Aux Inputs.
Line Ouput for connecting to a Booster Amplifier and Preamplifier Output for recording the programme.
Cut type Bass & Treble controls.
Instant transfer to DC power (Car Battery) if AC power fails.
Power Output
160W Max., 120W RMS at 10% THD, 105W RMS at 5% THD, 95W RMS at 2% THD
Output Regulation
≤ 2 dB, no load to full load at 1kHz
Input Channels
5 × Mic 0.65mV/4.7kΩ, 2 × Aux 100mV/470 kΩ
Frequency Response
50-15,000Hz ±3dB
Signal to Noise Ratio
60dB
Tone Controls
Bass: -10dB at 100Hz, Treble: -10dB at 10kHz
Outputs
Preamp 200mV/600Ω, Line 1V/1kΩ
Speaker Outputs
4Ω, 8Ω, 16Ω, 70V & 100V
Power Supply
AC: 220-240V 50/60Hz DC: 12V (12V Car Battery)
Power Consumption
AC: 250VA DC: 5.5A
Dimensions
W420 × H135 × D295 mm
Weight
11.3kg
Description:
SSA-160®EM
160 WATTS
MEDIUM WATTAGE PA MIXER AMPLIFIER
5 Mic & 2 Aux Inputs.
Preamplifier and Line Output for connecting to a Booster Amplifier and for recording the programme.
Line Input for connecting the output from any external mixer or permitting SSA-160EM to be used as a Booster Power Amplifier.
Resettable circuit breaker for protection against overload and short circuit.
Instant transfer to DC power (Car Battery) if AC power fails.
Box Speaker/Driver Unit selector switch. Bass boost defeated at Driver Unit position for safer operation of driver units.
Power Output
220W Max., 160W RMS at 10% THD, 140W RMS at 5% THD, 120W RMS at 2% THD
Output Regulation
≤ 2 dB, no load to full load at 1kHz
Input Channels
5 × Mic 0.65mV/4.7kΩ, 2 × Aux 100mV/470kΩ, 1 × Line 1V/50kΩ
Frequency Response
50-15,000Hz ±3dB
Signal to Noise Ratio
60dB
Tone Controls
Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
Output
Preamp 200mV/600Ω, Line 1V/1kΩ
Speaker Output
4Ω, 8Ω, 70V & 100V
Power Supply
AC: 220-240V 50/60Hz DC: 24V (2×12V Car Battery)
Power Consumption
AC: 300VA DC: 4A
Dimensions
W420 × H155 × D320 mm
Weight
13.6kg
Description:
SSA-250®M
250 WATTS
High Wattage PA Mixer Amplifier
6 Mic & 2 Aux Inputs.
Preamplifier and Line Output for connecting to a Booster Amplifier and for recording the programme.
Line Input for connecting the output from any external mixer or permitting SSA-250 to be used as a Booster Power Amplifier.
Resettable circuit breaker for protection against overload and short circuit.
Instant transfer to DC power (Car Battery) if AC power fails.
Box Speaker/Driver Unit selector switch. Bass boost defeated at Driver Unit position for safer operation of driver units.
Power Output
300W Max., 250W RMS at 10% THD, 220W RMS at 5% THD, 200W RMS at 2% THD
Output Regulation
≤ 2 dB, no load to full load at 1kHz
Input Channels
6 × Mic 0.65mV/4.7kΩ, 2 × Aux 100mV/470 kΩ, 1 × Line 1V/50kΩ
Frequency Response
50-15,000Hz ±3dB
Signal to Noise Ratio
60dB
Tone Controls
Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
Outputs
Preamp 200mV/600Ω, Line 1V/1kΩ
Speaker Outputs
4Ω, 8Ω, 70V & 100V
Power Supply
AC: 220-240V 50/60Hz DC: 24V (2×12V Car Battery
Power Consumption
AC: 460VA DC: 6A
Dimensions
W450 × H160 × D340 mm
Weight
16.0kg
Description:
SSA-250®FX
250 WATTS
High Wattage PA Mixer Amplifier
6 Mic & 2 Aux Inputs.
Built-in digital effect processor for 2 Mic Inputs.
Preamplifier and Line Output for connecting to a Booster Amplifier and for recording the programme.
Line Input for connecting the output from any external mixer or permitting SSA-250®M to be used as a Booster Power Amplifier.
Resettable circuit breaker for protection against overload and short circuit. Instant transfer to DC power (Car Battery) if AC power fails.
Box Speaker/Driver Unit selector switch. Bass boost defeated at Driver Unit position for safer operation of driver units.
Power Output
300W Max., 250W RMS at 10% THD 220W RMS at 5% THD, 200W RMS at 2% THD
Output Regulation
≤ 2 dB, no load to full load at 1kHz
Input Channels
6×Mic 0.65mV/4.7kΩ, 2×Aux 100mV/470 kΩ, 1 × Line 1V/50kΩ
Delay System
Digital Signal Processing
Delay Range Setting
60-300ms
Frequency Response
50-15,000Hz ±3dB
Signal to Noise Ratio
60dB
Tone Controls
Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
Outputs
Preamp 200mV/600Ω, Line 1V/1kΩ
Speaker Outputs
4Ω, 8Ω, 70V & 100V
Power Supply
AC: 220-240V 50/60Hz DC: 24V (2×12V Car Battery)
Power Consumption
AC: 460VA DC: 6A
Dimensions
W450 × H160 × D340 mm
Weight
15.70kg
Description:
APA-240
325 WATTS
Installation PA Power Amplifier
High quality booster amplifier in standard 19” rack mountable chassis, suitable for both table-top use and rack mounting. Ideal for fixed installations and a wide variety of PA applications such as in departmental stores, schools, hospitals etc.
1x Line 200mV unbalanced input and 2xLine 1V balanced inputs through XLR connector, one 1V input having priority over all other inputs.
100V input is provided for connecting another amplifier’s output in long line applications.
Ground lift switch provided at rear panel which helps reducing the hum that occures due to multiple ground loops in the installations.
Resettable circuit breaker for protection against overload and short circuit.
Loop through output for connecting another booster amplifier.
19” Rack mountable chassis.
Power Output
415W Max., 325W RMS at 10% THD, 300W RMS at 5% THD, 275W RMS at 2% THD
Output Regulation
≤ 2 dB, no load to full load at 1kHz
Input Channels
1 × 200mV/470kΩ (unbal.), 2 × 1V/50kΩ (bal.), 1 × 100V Input
Frequency Response
50-15,000Hz ±3dB
Signal to Noise Ratio
60dB
Tone Controls
Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
Outputs
Loop through 1 × 200mV/600W, 2 ×1V/1kW
Speaker Outputs
4Ω, 8Ω, 70V & 100V
Power Supply
AC: 220-240V 50/60Hz DC: 24V (2×12V Car Battery)
Power Consumption
AC: 600VA DC: 7A
Dimensions
W485 × H142 × D405 mm
Weight
20.6kg
Description:
PAM-3001
325 WATTS
INSTALLATION PA MIXER AMPLIFIER
5 Mic, 3 Aux & 1 Telephone Inputs.
2 Balanced Mic Inputs through Combo (Female XLR socket cum ¼” Stereo Phone Jack) connectors.
Mic-1 and Telephone Input provided with Voice Operated Priority over all other programmes.
Preamplifier and Line Output for recording the programme and connecting to a booster amplifier.
Line Input for connecting an external audio mixer or permitting PAM-3001 to be used as a Booster Power Amplifier.
Resettable circuit breaker for protection against overload and short circuit.
Instant transfer to DC power (Car Battery) if AC power fails.
Power Output
415W Max., 325W RMS at 10% THD, 300W RMS at 5% THD, 275W RMS at 2% THD
Output Regulation
≤ 2 dB, no load to full load at 1kHz
Input Channels
3 × Mic 0.65mV/4.7kΩ, 2 × Mic 1.0mV/2kΩ, 1 × Line 1V/50kΩ, 2 × Aux 100mV/470kΩ, 1 × Aux 250mV/470kΩ, 1 × Telephone 150mV/10kΩ
Frequency Response
50-15,000Hz ±3dB
Signal to Noise Ratio
60dB
Tone Controls
Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
Outputs
Preamp 200mV/600Ω, Line 1V/1kΩ, Monitor 5V/8Ω
Speaker Outputs
4Ω, 8Ω, 70V & 100V
Power Supply
AC: 220-240V 50/60Hz DC: 24V (2×12V Car Battery)
Power Consumption
AC: 600VA DC: 7A
Dimensions
W482 × H133 × D390 mm
Weight
19.8kg
PA AUDIO MIXING CONSOLES - STEREO
14 Input Channels with separate 6.3mm balanced phone jack for Mic and Line & accepts both balanced & unbalanced signals.
Each channel has GAIN, BASS, MID, TREBLE, ECHO, PAN and slide LEVEL controls with CLIP LED indicator.
Description:
PAM-3001Z
325 WATTS
INSTALLATION PA MIXER AMPLIFIER
5 Mic, 3 Aux & 1 Telephone Inputs.
Features and specifications are similar to PAM-3001.
PAM-3001Z has the additional feature of distributing the total load of 100V line amongst 5 speaker zones, allowing the output to designated areas. The zones are selectable through a zone selector push-button switch on the front panel.
Ideal for use in commercial establishments where the building may be sectionised in different areas such as office, warehouse, workshop etc.
19” Rack mountable.
Power Output
415W Max., 325W RMS at 10% THD, 300W RMS at 5% THD, 275W RMS at 2% THD
Output Regulation
≤ 2 dB, no load to full load at 1kHz
Input Channels
3 × Mic 0.65mV/4.7kΩ, 2 × Mic 1.0mV/2kΩ, 1 × Line 1V/50kΩ, 2 × Aux 100mV/470kΩ, 1 × Aux 250mV/470kΩ, 1 × Telephone 150mV/10kΩ
Frequency Response
50-15,000Hz ±3dB
Signal to Noise Ratio
60dB
Tone Controls
Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
Outputs
Preamp 200mV/600Ω, Line 1V/1kΩ, Monitor 5V/8Ω
Speaker Outputs
4Ω, 8Ω, 70V & 100V
Zone Selection
5 + All Zone
Power Supply
AC: 220-240V 50/60Hz DC: 24V (2×12V Car Battery)
Power Consumption
AC: 600VA DC: 7A
Dimensions
W482 × H133 × D390 mm
Weight
19.8kg
DESCRIPTION:
LXA-1400
675+675 WATTS
Dual Channel PA Power Amplifier
New 1350 Watts Direct Coupled Amplifier with attractive most modern aesthetics, combined with legendary Ahuja ruggedness and reliability.
Dual channel direct coupled amplifier.
1350 Watts rated output.
Rugged, reliable and designed to work continuously under stringent conditions
High fidelity sound.
Ideal for high end music programmes.
Continuous Rated Power
.
Stereo/Mono
8Ω : 2 × 250W, 4Ω : 2 × 475W 2Ω : 2 × 675W
Bridged Output
8Ω : 950W, 4Ω : 1350W
THD + N
< 1.0%
Frequency Response (-1dB)
20-20,000Hz
Power Bandwidth (0.5% THD)
20-20,000Hz
Input Sensitivity
0dBm (775mV)/1.23V (selectable)
Input Impedance
10k Unbalanced, 20k Balanced
S / N Ratio
> 95dB
Channel Separation
> 65dB at 1kHz
Damping Factor
400 : 1 (8Ω)
Slew Rate
35V/µs
Protections
Temperature, DC, RFI, Short Circuit, Overload, Built-in Limiter, AC: Fuse 10Amp. (T 10A L); ± DC: Fuse 2 x 10Amp. (T 10A L) for each zone, ± DC: Fuse 2 x 2Amp. (for fan supply)
Input Connectors
2 × XLR, Stereo Phone Jack 6.3mm
Output Connectors
Speakon 4-Way, Heavy duty Binding Post for each channel
Cooling
Variable Speed DC Fan with Temperature Sensing
Front Panel Controls
2 × 21 Step Level Attenuators
Indicators
Power ON, Signal, Clip, Temperatures, Protect (Ch. A & B)
Power Consumption (Rated)
1800VA @ 240V / 50Hz
Dimensions
W482 × H113 × D460 mm
Weight
14.7kg
Description:
SPA-5000®EM
500 WATTS
High Wattage PA Power Amplifier
Line Input 200mV/1V switchable for connecting a mixer or another amplifier.
Resettable circuit breaker for protection against overload and short circuit.
Instant transfer to DC power (Car Battery) if AC power fails.
Box Speaker/Driver Unit selector switch. Bass boost defeated at Driver Unit position for safer operation of driver units.
Ideal for large installations where a high power output is required. A combination of a SSA-5000EM and one SPA-5000EM can deliver 1000W power output.
Power Output
750W Max., 500W RMS at 10% THD, 450W RMS at 5% THD, 415W RMS at 2% THD
Output Regulation
≤ 2 dB, no load to full load at 1kHz
Input Channels
1 × Line 200mV/100kΩ, 1 × Line 1V/50kΩ
Frequency Response
50-15,000Hz ±3dB
Signal to Noise Ratio
60dB
Tone Controls
Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
Speaker Outputs
4Ω, 8Ω, 70V & 100V
Power Supply
AC: 220-240V 50/60Hz DC: 36V (3×12V Car Battery)
Power Consumption
AC: 1000VA DC: 8A
Dimensions
W510 × H172 × D385 mm
Weight
25.7kg